How To Replace Kitchen Sink Faucet. Replace the washer and nut on the supply line and tighten them down using a wrench. Cut the hose connecting the faucet to the sprayer with a pair of scissors. Clean out under the sink and turn off the water supply.
How To Replace a Kitchen Faucet Kitchn from www.thekitchn.com
Connect the water line to the faucet and tighten both lines using pliers or a crescent wrench (if necessary). Turn off the water to the faucet.
Connect The Faucet Supply Lines By Wrapping Teflon Tape Around The Supply Line And Then Screw On The Water Supply Line.
The sprayer is held by another plastic nut. Hopefully, you will find some courage to replace your faucet after reading these steps. If the repair fails, you may need to. Connect the faucet supply lines.
Watch How To Install A New Kitchen Faucet Yourself.
Refer to the manufacturer's instructions regarding the use of caulk or plumbers putty in gasket installation. Steps to follow when replacing kitchen sink faucets. Tighten the hose connection by turning it clockwise until it clicks into place. Replacing an old kitchen sink faucet with a new one is not as easy as installing a new one but following the steps below will make it easy for you.
Thread the sprayer hose in through the faucet attachment and down under the sink. Connect the water line to the faucet and tighten both lines using pliers or a crescent wrench (if necessary). Loosen the screws that hold the sink to the underside of the countertop. Carefully remove the old faucet off of the sink.
Screw On The Nut With Your Fingers First, And Then Use Your Basin Wrench From The Right Side To Turn It Clockwise.
If the leak persists, replace the seals. Before you can even think of installing the new faucet, you must remove the old one. Here are the steps for removing the kitchen faucet: Time to take you through the steps you came here looking for.
Tidak ada komentar untuk "How To Replace Kitchen Sink Faucet"
Posting Komentar